To set up Screen Recording:

1.Open Main Menu and choose Local Settings.

2.Go to the Screen Recording tab.

3.Configure Screen Recording parameters:

•Temporary Folder – the folder that stores temporary files. FIles are stored during recording, then are copied to a specified folder to be saved.

IMPORTANT. This folder should be accessible and writable.

•Capture Mode: Fullscreen (if several monitors are installed the desired one should be chosen) or Application Window (only Nx Witness window will be recorded).

•Disable Aero – select this option to enhance performance. If chosen, once Screen Recording is in progress, Windows Aero will be turned off.

•Capture Cursor – select this checkbox if a mouse cursor needs to be visible during recording.

•Resolution – select screen resolution. The lower the resolution, the higher the performance.

•Encoder Quality – select Performance for best performance. Select Best for best quality.

•Primary and Secondary device – select sound devices to enable audio. Audio will get mixed from both devices. The best practice is to select master from the sound card as primary and microphone as secondary. In this case, both sounds from Nx Witness (i.e. video clips) and microphone will be recorded simultaneously.

4.Click OK when done or Cancel to discard changes.